How to Find Hidden Piping and Valves
If you are a homeowner then you need to know the details of your home like the back of your hand. Finding hidden water as well as gas piping valves is something that you need to look into and know where they are especially if you have to deal with things like emergencies. Some of the ways that you can be able to find out where the various shut off valves are located are briefly highlighted below.
In order to locate the gas shutoff valve then you need to find out if you have natural gas since the shutoff valve will be located outside the home just before the gas meter. Such nubs are usually rectangular in shape and usually use a wrench and gas companies do not recommend touching them. A second valve is usually located further down the line or where the gas pipe first enters.
There are high chances that the gas pipes you have are made from flexible copper if you own a modern home and the valves are most likely to be located in the utility room. If you find such a piping in your home then you are sure that you have a really high pressure gas system. With the gas system, you are sure that you will find the shut off valve near the water heater or somewhere near the furnace.
When it comes to water meters, you will likely have two shutoff valves one before and the other after the meter as shown on this homepage. Cold environments usually have the shut off points located in the house so that they do not freeze. For milder climates, you are most likely to find out that the valves are located in an underground lid or box next to exterior.
Take time to look at property reports if you are finding it hard to locate water shut off valve since they are usually indicated in property reports given in the last phase of the property purchase. It is important to look keenly at the report since it will show you where the valve is located. Pictures of the valves will also be drawn so that you are able to know what they look like.
With most automatic sprinklers located underground, there is a very high chance that they may be a little bit harder to find. Since such valves usually have metals then you can easily find them by using a metal detector. Even though such valves may not be located exactly where the plans says using the plans is something that will definitely help you to find out where you need to start.